Up WindowSeals Prev Next Slideshow

Previous image Next image Index page
IMG_1850
IMG_1852
IMG_1853
IMG_1854
IMG_1855
  IMG_1856.JPG - The rope pull installation method is used. A cord of carefully selected size is put in the gasket groove that fits over the pinchweld. Then after the glass/gasket assembly in set into place and the cord is gently pulled towards the center of the glass. This pulls the inside gasket lip into place a little at a time. Note that if sealant is put in that groove the cord is going to pull most of it out, making a big mess. Hence no sealant is put in that grove.  
IMG_1857
IMG_1858
IMG_1859
IMG_1860
IMG_1861

IMG 1856 | The rope pull installation method is used. A cord of carefully selected size is put in the gasket groove that fits over the pinchweld. Then after the glass/gasket assembly in set into place and the cord is gently pulled towards the center of the glass. This pulls the inside gasket lip into place a little at a time. Note that if sealant is put in that groove the cord is going to pull most of it out, making a big mess. Hence no sealant is put in that grove. Download
Total images: 36 | Last update: 12/2/09 2:48 PM | Help