Up WindowSeals Prev Next Slideshow

Previous image Next image Index page
Headliner_1
Headliner_2
IMG_1844
IMG_1845
IMG_1846
  IMG_1847.JPG - Here we see clearly that the pinchweld had no sealant along the lower edge. Actually, getting sealant there is impossible unless it's applied to the gasket beforehand, which would create a terrible mess while using the "rope pull" method of setting the glass/gasket assembly into the car. The alternative is to fill the gap between the gasket and body once the assembly is in place. Not what jaguar intended, but probably the best idea for a water tight seal.  
IMG_1848
IMG_1849
IMG_1850
IMG_1852
IMG_1853

IMG 1847 | Here we see clearly that the pinchweld had no sealant along the lower edge. Actually, getting sealant there is impossible unless it's applied to the gasket beforehand, which would create a terrible mess while using the "rope pull" method of setting the glass/gasket assembly into the car. The alternative is to fill the gap between the gasket and body once the assembly is in place. Not what jaguar intended, but probably the best idea for a water tight seal. Download
Total images: 36 | Last update: 12/2/09 2:48 PM | Help